Devilkin Kit

$50.99  /  0.00122 Ƀ

A high-performance kit with some devilishly clever touches, the 225W SMOK Devilkin mod and TFV12 Prince tank is a match made in heaven, not hell.

Add to Wishlist
Add to Wishlist


SMOK Devilkin Kit
There’s a lot to love in this design, even if its name does mean ‘son of the devil’.

With a swooping edge, the design is more ergonomic than a samurai sword. And SMOK’s signature full-length firing bar makes vaping comfortable whether you are right-handed or left-handed (it also makes a satisfying clicky sound when you press it).

The dual-battery mod is capable of a demonic 225W of maximum power and the 1.3” TFT screen is clearly readable, even when you are using the mod in direct sunlight.

In the past, SMOK mods have looked a bit gimmicky and cheap. But not this one. The Devilkin has no unnecessary LEDs and you can feel the build quality in your hand.

There are some great features inside the mod as well. If you are a new or intermediate vaper, then there are the basic variable wattage and temperature control modes.

But if you are looking for something extra, you can also alter the ramp up, screen colors and memory settings. There’s even a full temperature control suite for seriously advanced vaping.

SMOK has also included a range of protections for your peace of mind. The Devilkin mod has overheating protection, short circuit protection and a 10-second cut off.

In the Devilkin kit, SMOK has paired the ergonomic mod with one of their most popular tanks, the TFV12 Prince.

This 8ml bubble tank has been built for performance and ease-of-use. It comes with two cloud-chucker coils – one that’s 0.4ohms and one that’s 0.12ohms – as well as one of SMOK’s distinctive Cobra drip tips.

The tank also has a smooth bottom-twisting airflow and a top-fill locking mechanism.

Devilkin provides multiple types of protection to avoid potential risks:

– Intelligent Atomizer Recognition
– Puff Monitoring System
– 10 Seconds Cut-off
– Short Circuit Protection
– Over-heating Protection
– Over discharge protection

Cobra Drip Tip

TFVI 2 Prince tank uses Cobra drip tip which has wild outlook and special tactility. Besides, it will bring you increased airflow.

Patented Locking Mechanism

The newly designed top cap has a patented locking mechanism, simply press this button then you can open the cap. Besides, this design can effectively avoid accidently opening of top cap and leaking of e-juice.

Top Refill System

Top rotary refill makes filling a easy thing. Leak proof slot can significantly solve leaking problem.

How to Refill SMOK Devilkin Kit

Hold the tank with one of your hands, use another one to press top cap and move it counterclockwise. Add vape juice through the slot and pay attention not to drip it into the central airflow tube. Close the cap carefully and firmly. Then let it stand for several minutes to get the organic cotton completely saturated.

How to Rebuild RBA

1. Before starting make sure your hands are clean.
2. Take RBA deck apart.
3. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
Cut a strip of cotton and make sure it’s not too much and not too little.
4.Insert the cotton and placing it in the middle. Cut the cotton at an angle and make sure it’s not too short and not too long. Wet the coil with your e-liquid and adjust the cotton.

Warning: Coils must be checked for resistance before they are fired on a device, and rechecked periodically to ensure the resistance remains the same.

SMOK Devilkin Starter Kit Features and Specifications:
– Tank Capacity: 8ml
– Tank Size: 28 x 63mm
– Mod Size: 86 x 49.6 x 34.2mm
– Power Range: 1W-225W
– Standby Current: <500μA
– Output Voltage: 0.5V-9.0V
– Resistance Range: 0.1Ω-2.5Ω(VW)/0.05Ω-2.0Ω(TC)
– Temperature Range: 200°F-600°F/100°C-315°C

SMOK Devilkin Starter Kit Includes:
– 1x SMOK Devilkin Mod
– 1x SMOK TFV12 Prince Tank
– 1x SMOK V12 Prince Coils -Q4 0.4 ohm Quadruple Coils (pre-installed)
– 1x SMOK V12 Prince Coils – T10 0.12 ohm Decuple Coils
– 1x Replacement Glass Tube
– 1x USB Cable
– 1x User Manual
– 1x Set of Spare Parts


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.